What is LTV in DeFi lending? It is your debt divided by the value of your collateral, and it is the number every lending protocol watches to decide whether your position is safe. The confusing part is that DeFi gives you not one LTV figure but three: your current LTV, the maximum you may borrow to, and the line where you get liquidated. Mixing them up is how borrowers end up liquidated after a move they thought they could survive. This guide, part of our crypto loans guide, separates them with real protocol numbers.
Key takeaways
- LTV is debt ÷ collateral value: $6,000 borrowed against $10,000 of ETH is 60% LTV, and it changes every time the price or your debt changes.
- Max LTV and the liquidation threshold are two different limits: on Aave v3 WBTC in September 2026 you could borrow up to 73%, but liquidation started at 78%.
- The gap between them is your real buffer: borrowing at Aave’s WBTC maximum left only about a 6.4% price drop before liquidation.
- The health factor turns this into one number: above 1 you are safe, below 1 anyone can liquidate you; borrowers who have been through crashes watch how fast it is falling, not just its level, and many keep it above 2.
- High-LTV modes are where the risk concentrates: in August 2026, Aave E-Mode debt sat near 90% LTV with a health factor around 1.06, against about 49% and 1.79 for ordinary loans.
LTV in DeFi lending: the basic formula
LTV in DeFi lending is calculated exactly as in any secured loan: LTV = value of your debt ÷ value of your collateral. Deposit ETH worth $10,000, borrow $6,000 in USDC, and you are at 60%.
The difference from a bank loan is that both sides are priced live by an oracle. If ETH rises 20%, your LTV falls to 50% without you doing anything. If ETH falls 20%, it rises to 75%. Interest accrues every block, so the debt side grows too. An LTV is a snapshot, not a setting.
Some protocols express the same idea upside down, as a collateral ratio: collateral ÷ debt. A 150% collateral ratio is the same as 66.7% LTV, and 200% is 50% LTV. Coinbase loans on Morpho, for example, require a minimum collateral ratio of 133%, which is a 75% maximum LTV.

Max LTV vs liquidation threshold: the two lines that matter
Every DeFi lending market sets two limits per collateral asset, and the protocols name them differently.
- Max LTV (Aave), borrow collateral factor (Compound): how far you are allowed to borrow when you open or increase a loan. Above it, the protocol refuses new borrowing.
- Liquidation threshold (Aave), liquidate collateral factor (Compound), LLTV (Morpho): the LTV at which your position becomes liquidatable. On Compound, liquidation factors are always separate from and higher than borrow factors.
Morpho is the exception that simplifies things: each market has one LLTV, such as 86%, and the position becomes liquidatable as soon as its LTV exceeds it. Front-ends built on Morpho, such as Coinbase loans, set their own lower borrowing limit on top.
Comparison
| Market | Max LTV (borrow limit) | Liquidation line | Price drop from max LTV to liquidation |
|---|---|---|---|
| Aave v3 Ethereum Core, WBTC | 73% | 78% | about 6.4% |
| Coinbase loan on Morpho (cbBTC/USDC) | 75% (133% collateral ratio) | 86% | about 12.8% |
| Aave proposal for BTC collateral (under vote, Sept 2026) | 81% | 85% | about 4.7% |
The last column is the number most guides skip. It is 1 − max LTV ÷ liquidation threshold: how far the collateral price can fall, with your debt unchanged, before a position opened at the maximum is liquidated. On Aave’s WBTC market that was about 6.4%; a proposal under vote in September 2026 would have cut that cushion to about 4.7%. Bitcoin moves that much in a normal week.
Myth vs fact
Myth: if the protocol lets me borrow up to 73%, 73% is a safe level.
Fact: max LTV is a ceiling for opening a loan, set only a few points below the liquidation line; at Aave’s WBTC maximum, a drop of about 6% is enough to liquidate.
The health factor: LTV turned into one number
Aave and Morpho summarize your position as a health factor. On Aave it is total collateral value × weighted average liquidation threshold ÷ total debt. On Morpho it is collateral value × LLTV ÷ borrowed amount. Above 1.0 the position is healthy; below 1.0 it can be liquidated.
The health factor is simply your distance to the liquidation line, expressed as a ratio: health factor = liquidation threshold ÷ current LTV. If you are at 52% LTV on a market with a 78% threshold, your health factor is 1.5, and the collateral price can fall by one third (1 − 1/1.5) before liquidation.
Example
Worked example: Model example. You deposit 1 WBTC worth $80,000 on a market with a 73% max LTV and a 78% liquidation threshold, and borrow $40,000 USDC.
- LTV: $40,000 ÷ $80,000 = 50%, well below the 73% you were allowed.
- Health factor: $80,000 × 0.78 ÷ $40,000 = 1.56.
- Liquidation price: $40,000 ÷ 0.78 = about $51,300 per BTC, a fall of about 36%.
- If you had borrowed the maximum ($58,400 at 73%), the health factor would be 1.07 and the liquidation price about $74,900, only 6.4% away.
With several collateral assets, the protocol uses a weighted average liquidation threshold, so adding a stablecoin with a high threshold or a volatile token with a low one shifts the whole position.
What moves your LTV besides the collateral price
Collateral price is the obvious driver, but others catch borrowers out.
- Interest: debt grows every block. At variable DeFi rates that can jump when borrowing demand spikes, a position left alone for a year drifts upward even in a flat market.
- The price of what you borrowed: LTV compares two prices. If you borrowed a token that rises against your collateral, your LTV rises too. Stablecoin debt is not immune: a stablecoin trading above its peg raises your debt’s value, and the oracle price is what counts.
- Parameter changes: max LTV and liquidation thresholds are set by protocol governance and risk managers, and they can be lowered for an asset that becomes riskier. Your position can move closer to liquidation without any price change. Borrowers who loop yield-bearing stablecoins watch governance for exactly this reason: one Aave proposal discussed replacing a hard-coded USDe price of 1 USDT with its market price, which would move every such position at once.
- Oracle errors: the protocol only sees the price its oracle reports. On 10 March 2026, a faulty parameter update depressed Aave’s wstETH price by about 2.85% and triggered roughly $26.6 million of liquidations, without the asset falling in the market.
Security warning
Watch out: High-LTV modes such as Aave’s E-Mode let you borrow correlated assets at LTVs near 90% or more. In August 2026, Aave E-Mode positions sat at a debt-weighted LTV near 90% with a health factor of about 1.06, compared with 49% and 1.79 for ordinary positions. A health factor of 1.06 leaves room for a move of about 6% between the two assets before liquidation.
Looping and E-Mode: where LTV gets tight
The highest LTVs in DeFi come from looping: deposit an asset, borrow against it, buy more of the asset, deposit that too, and repeat. One borrower’s example: deposit 1 ETH, borrow $3,000, buy 0.75 ETH, deposit it, borrow $2,000, buy 0.5 ETH, deposit it. The result is about 2.25 times exposure to ETH from a single coin, and an LTV far above what one loan would have.
Experienced users split looping into two kinds:
- Leverage loops with a volatile asset against stablecoin debt. They work like a leveraged long, and a normal price drop can liquidate them.
- Carry loops with correlated assets, such as a liquid-staking token against ETH or a yield-bearing stablecoin against other stablecoins, usually in E-Mode. They pay only while the supply rate beats the borrow rate; one example from a discussion was 3.1% earned against 2.5% paid, a spread that can vanish when rates move. Their LTV risk comes not from the market but from the two assets drifting apart: a depeg, an oracle error or a parameter change.
That is why the E-Mode figures above matter. At a health factor of about 1.06, a 6% gap opening between two “correlated” assets is enough to liquidate a looped position. Users also point out that looping by hand on Ethereum mainnet can cost several transactions’ worth of gas, which eats into a thin spread.
What happens when LTV crosses the liquidation line
Once your health factor falls below 1, liquidation is open to anyone, and the protocol does not send warnings. On Aave v3, a liquidator can repay up to 50% of your debt while the health factor is above 0.95 and both collateral and debt are at least $2,000, or up to 100% below that. In return the liquidator takes collateral worth the repaid debt plus a bonus, which is your penalty. On a Morpho market with an 86% LLTV, the liquidation incentive formula gives a bonus of about 4.4%, and the whole debt can be repaid at once.
Compound III takes a different route: the protocol absorbs the underwater account, repays its debt from reserves, and later sells the collateral at a discount. The borrower is left with no debt and the collateral’s value minus a penalty, paid out in the base asset.
Before you supply collateral, it also helps to know what a protocol audit does and does not cover; our guide to DeFi lending audits explains it.
How to choose your own LTV
No protocol tells you what LTV to run; it only tells you the limits. A practical approach is to pick the drop you want to survive and work backwards: target LTV = liquidation threshold × (1 − drop).
- To survive a 30% drop on a 78% threshold: stay at or below about 55% LTV (health factor 1.43).
- To survive a 50% drop: stay at or below about 39% LTV (health factor 2.0).
- Leave extra room for interest and for a possible parameter change.
Tip
Track the health factor, not the LTV, in your wallet or dashboard. It already includes the liquidation threshold and every collateral asset, so one alert at, for example, 1.5 covers the whole position. A developer of position-monitoring tools adds that the trend matters more than the level: a health factor of 1.4 falling quickly in a volatile session is more dangerous than 1.2 in a calm market, and positions on several protocols and chains all fall at once in a crash.
The numbers borrowers quote for themselves are conservative. One long-term Aave borrower keeps the health factor above 2.0, which on a 78% threshold means staying under about 39% LTV, and others say that below 50% LTV only a real market crash can reach the liquidation line. A common beginner mistake runs the other way: reading an 80% liquidation threshold as “80% of my collateral can be sold”. It is the LTV at which the position becomes liquidatable, with the whole collateral counted.
Summary: What Is LTV in DeFi Lending?
LTV in DeFi lending is debt divided by collateral value, but borrowers need to watch three numbers: their current LTV, the market’s max LTV and the liquidation threshold. The real safety margin is the gap between where you are and the liquidation line, which at the maximum allowed LTV can be as small as 5% to 6%. Watch the health factor, choose your LTV for the drop you want to survive, and remember that interest and parameter changes move it too.
Risk notice
This article explains how DeFi lending works and is not investment advice. DeFi positions can be liquidated without warning, protocol parameters change through governance, and smart contracts carry their own risks. Check current market parameters before borrowing.
What Is LTV in DeFi Lending? FAQ
What is a good LTV in DeFi lending?
There is no universal number. Pick the price drop you want to survive and multiply the liquidation threshold by (1 − drop): to survive a 50% fall on a 78% threshold, that is about 39% LTV, or a health factor of 2.
What is the difference between LTV and liquidation threshold?
LTV is where your position is now, or the maximum you may borrow to. The liquidation threshold is the higher LTV at which the position can be liquidated. The gap between them is your buffer.
How is the health factor related to LTV?
The health factor equals the liquidation threshold divided by your current LTV. At 52% LTV on a 78% threshold, the health factor is 1.5; below 1, the position can be liquidated.
What is looping in DeFi lending?
Depositing an asset, borrowing against it, buying more of the asset and depositing it again, several times over. It multiplies your exposure and pushes your LTV close to the liquidation line, so a small price gap or depeg can liquidate it.
Why did my LTV go up when prices didn’t change?
Because interest is added to your debt every block, the asset you borrowed may have risen against your collateral, or the protocol may have changed the asset’s parameters.
Sources
Sources (11)
- Galaxy Research: The State of Crypto Leverage Q2 2026 (17 August 2026, verified 11/2026). www.galaxy.com/insights/research/crypto-leverage-report-q2-2026-defi-lending-decline-futures-open-interest
- Aave: Liquidations, Aave Help Center (no date, verified 11/2026). aave.com/help/borrowing/liquidations
- Compound: Collateral and borrowing, Compound III documentation (no date, verified 11/2026). docs.compound.xyz/collateral-and-borrowing/
- Compound: Liquidation, Compound III documentation (no date, verified 11/2026). docs.compound.xyz/liquidation/
- Morpho: Liquidation, Morpho documentation (no date, verified 11/2026). docs.morpho.org/learn/concepts/liquidation/
- Coinbase: Borrow against your crypto (no date, verified 11/2026). www.coinbase.com/en/loans
- The Block: Coinbase launches bitcoin-backed onchain loans via DeFi protocol Morpho (16 January 2025, verified 11/2026). www.theblock.co/post/335007
- CryptoSlate: Narrowing price cushions leave bitcoin loans vulnerable to 4.7% price dips as Aave weighs higher leverage (22 September 2026, verified 11/2026). cryptoslate.com/narrowing-price-cushions-leave-bitcoin-loans-vulnerable-to-4-7-price-dips-as-aave-weighs-higher-leverage/
- LlamaRisk: Post-mortem, exchange rate misalignment on wstETH Core and Prime instances, Aave governance forum (16 March 2026, verified 11/2026). governance.aave.com/t/post-mortem-exchange-rate-misallignment-on-wsteth-core-and-prime-instances/24269/18
- RareSkills: DeFi liquidations and collateral (updated 24 September 2025, verified 11/2026). www.rareskills.io/post/defi-liquidations-collateral
- Cyfrin Updraft: Aave v3 contract architecture, LTV (updated 25 July 2025, verified 11/2026). updraft.cyfrin.io/courses/aave-v3/contract-architecture/ltv
Our standards
This article was researched from primary sources and checked by a second person before publication. Found an error or an outdated number? Tell us and we will correct it. Corrections policy.
